Forterra

Samac 4.0x60mm Performance Plus - POZI Wood Screws - High Performance Wood Screws with Free Pozi Bit. Reduces head breakage and assists countersinking. Corrosion resistant and significantly reduces torque.

100mm Black Phosphate Fine Thread Drywall Screws - Designed for fixing plasterboard to wooden battens. Bugle head with Phillips recess allows the screw to be driven without damaging the board surface. Black phosphate finish.

65mm Black Phosphate Fine Thread Drywall Screws - Designed for fixing plasterboard to wooden battens. Bugle head with Phillips recess allows the screw to be driven without damaging the board surface. Black phosphate finish.

400mm Milner Scored Fireback - Firebacks are used to contain a fire and prevent damage to the brickwork of the chimney. They also help to radiate heat back into the room.

400mm Throat Restrictor

400mu Yellow Radon Membrane 4 x 20m

40mm Oval Brad Head Nails are used where concealment is required or where there is a danger that the use of a standard round wire nail would split the wood. The Oval Brad is tapped below the level of the timber in door jambs, floor and skirting boards.

40mm x 2.36mm Galvanised Round Wire Nails are general purpose nails used when protection from rust is a requirement. Most commonly used for roof battens and fencing applications etc.

40mm x 2.65mm Galvanised Clout Nails 1kg are used for securing products which require a larger head size to increase the ‘surface of hold’ compared to a standard round wire nail. They are galvanised for protection against exposure to wet conditions.

40mm x 3.00mm Galvanised ELH Felt Nails 2.5kg- Extra Large Head (ELH) nails are ideal for securing felt or plastic roofing materials. The large head gives an increased surface of hold which reduces the possibility of tearing.

40mm x 3.0mm Galvanised ELH Felt Nails 1kg- Extra Large Head (ELH) nails are ideal for securing felt or plastic roofing materials. The large head gives an increased surface of hold which reduces the possibility of tearing.

40mm x 3.35mm Aluminium Clout Nails 1kg - are most commonly used for securing tiles and other sheet materials in a roofing application.

40mm x 4.00mm Galvanised Staples 1kg these staples are commonly used for securing wire to fence posts, especially in the agricultural sector. They are galvanised for protection against exposure to wet conditions.

40x1.6mm Sheradised Panel Pins are ideal for lightweight and decorative jobs. The small heads can be punched below the surface meaning the hole can then be filled to give an excellent finish. The sherardised panel pin is used where protection from moisture is a requirement of the application.

40x40mm Angle Mouldings 2.4m Pine is a versatile softwood trim, perfect for corner protection, edge finishing, and decorative woodwork. Made from high-quality PEFC-certified pine, this moulding provides a smooth, natural finish that can be painted, stained, or varnished to match any interior